Connect-Ease YAK MAX PRO kayak trolling motor wiring system with 10 foot leads

YAK MAX PRO — Kayak Trolling Motor & Electronics Wiring System (10 ft Leads)

RCEKYKPRO

Regular price$ 149.99
/

Same YAK MAX PRO power system, with 10-foot leads for kayaks where the motor sits far from the battery — bow-mounted motors or stern motors with a center battery. Run your trolling motor and up to three electronics off one battery with pack-in/pack-out convenience.

Kayaks and small craft leave no room for messy wiring. YAK-EASE systems are built for pack-in/pack-out use: leave the harness rigged, pull the battery for charging, and reconnect in seconds with Connect-Ease plug-and-play, marine-grade connections that shrug off spray, rain and cold.

Compatible trolling motors and vehicles: Kayak and small-boat 12V motors — Minn Kota Endura and PowerDrive, MotorGuide R3/X3, Newport Kayak Series, Watersnake. Compatible electronics and accessories: Humminbird HELIX 5–9 and MEGA Live; Garmin STRIKER, ECHOMAP UHD2 and LiveScope; Lowrance Elite FS, Eagle and ActiveTarget 2.

System voltage: 12V. Recommended batteries: 12V LiFePO4 lithium 30–60Ah or 12V AGM. Amperage and protection: Use a 50A breaker for the motor; fuse electronics 3–5A.

The full-length version of the YAK MAX PRO — 10 feet of nylon-sheathed positive and negative rigging with 3 fused connections and a quick-snap battery connector. Built for serious kayak anglers who need clean, reliable power for multiple electronics and a trolling motor from a single self-contained system.

  • Wire: 10 ft nylon-sheathed positive and negative leads
  • Connections: 3 fused accessory connections + quick-snap battery connector
  • Electronics: Powers multiple graphs, live imaging, forward-facing sonar transducers, and black boxes
  • Compatibility: Works with Minn Kota, MotorGuide, Humminbird, Garmin, Lowrance, and more
  • Features: Heat-shrinkable splices for corrosion-free connections; pack-in/pack-out battery removal
  • Lithium compatible; Pro tested

• 10 ft trolling motor leads for bow or remote mounts
• 3 fused accessory connections
• Quick-snap battery connector
• Heat-shrink, corrosion-free connections
• Lithium compatible

Compatible Trolling Motors:

  • Kayak and small-boat 12V motors — Minn Kota Endura and PowerDrive
  • MotorGuide R3/X3
  • Newport Kayak Series
  • Watersnake

Compatible Fish Finder:

  • Humminbird HELIX 5–9 and MEGA Live
  • Garmin STRIKER
  • ECHOMAP UHD2 and LiveScope
  • Lowrance Elite FS
  • Eagle
  • ActiveTarget 2

Recommended Voltage/ Amperage/ Fuse/ Breaker:

12V Use a 50A breaker for the motor; fuse electronics 3–5A

Battery Types:

12V LiFePO4 lithium 30–60Ah or 12V AGM

FAQ: 18-inch or 10-foot — which do I need?

A: Choose 18" if your battery sits next to the motor; choose 10 ft for bow mounts or a centered battery.

FAQ: Is it lithium compatible?

A: Yes. 

 

 

kayak trolling motor wiring 10 ft, bow mount kayak motor wiring; kayak battery to motor extension; kayak electronics harness

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.