Connect-Ease Ignite RCE24VSCK 24V single-case lithium trolling motor wiring kit
Connect-Ease Ignite RCE24VSCK 24V single-case lithium trolling motor wiring kit
Connect-Ease Ignite RCE24VSCK 24V single-case lithium trolling motor wiring kit
Connect-Ease Ignite RCE36VSCK 36V single-case lithium trolling motor wiring kit
Connect-Ease Graph Power Tiller RCE12VGRPTLR 10 foot electronics wiring harness for tiller boats
Connect-Ease Ignite RCE24VSCK 24V single-case lithium trolling motor wiring kit
Connect-Ease Graph Power Tiller RCE12VGRPTLR 10 foot electronics wiring harness for tiller boats

Ignite 24V — Single-Case Lithium Battery Trolling Motor Wiring Kit

RCE24VSCK

Regular price$ 109.99
/

 

Switched to a single 24V lithium battery? Ignite 24V is purpose-built for it. One plug connects your trolling motor and charger to the battery, so you can lift a lighter lithium pack out for charging or security without loosening a terminal.

Connect-Ease's patented, self-cleaning, positive-lock connectors replace wing nuts and stacked ring terminals at the battery. Install once and every connection after that is plug-and-play — the system wires your batteries correctly every time, and integrated charging leads keep your on-board charger connected while you fish, trailer or store the boat.

Compatible trolling motors and vehicles: Minn Kota Ultrex, Ulterra, Terrova and Riptide (24V / 70–80 lb); Garmin Force (24V); Lowrance Ghost (24V); MotorGuide Tour, X5 and Xi5 (24V); Rhodan 24V.

System voltage: 24V (single-case lithium). Recommended batteries: One 24V single-case LiFePO4 lithium (60–120Ah) — Dakota Lithium, Amped, Norsk, Monster, Lithium Pro, Abyss. Amperage and protection: 24V motors (70–80 lb) draw up to ~56A at full throttle. Protect with a 60A resettable breaker.

The Connect-Ease Ignite 24V is a purpose-built, plug-and-play wiring system for 24V trolling motors powered by single-case lithium batteries (60–120Ah). Delivers clean, full-voltage power directly from the battery to the motor — maximizing thrust, efficiency, and runtime for serious anglers.

• Designed for 24V single-case lithium batteries
• Integrated charger connection
• Self-cleaning, positive-lock connectors
• Quick battery removal for charging or theft prevention
• Marine-grade wire with heat-shrink terminations

  • Wire: 6-gauge marine-grade harness with quick-connect battery terminals
  • Protection: 60-amp resettable circuit breaker
  • Ground: Negative ground block included
  • Charging: Integrated on-board charging leads with heat-shrink terminals and splices
  • Compatible Motors: Minn Kota Quest 24V, Garmin Force Kraken 24V, Lowrance Ghost, MotorGuide, Rhodan 24V systems
  • Compatible Batteries: Any 24V single-case lithium battery — Dakota Lithium, Amped, Norsk, Monster, Lithium Pro, Abyss (60–120Ah typical)
  • Compatibility: Lithium battery optimized; plug-and-play ready
  • Warranty: 1-year warranty

Compatible Trolling Motors:

  • Minn Kota Ultrex
  • Ulterra
  • Terrova
  • Riptide (24V / 70–80 lb)
  • Garmin Force (24V)
  • Lowrance Ghost (24V)
  • MotorGuide Tour, X5 and Xi5 (24V)
  • Rhodan 24V

Recommended Voltage/ Amperage/ Fuse/ Breaker:

24V (single-case lithium), 24V motors (70–80 lb) draw up to ~56A at full throttle. Protect with a 60A resettable breaker

Battery Types:

One 24V single-case LiFePO4 lithium (60–120Ah) — Dakota Lithium, Amped, Norsk, Monster, Lithium Pro, Abyss

FAQ: Will it fit my brand of 24V lithium?

A: Yes. It connects to the terminals of any 24V single-case lithium, including Dakota Lithium, Amped, Norsk and Abyss.

FAQ: Can I use it with two 12V batteries?

A: No. For two 12V batteries in series, use RCE24VBCHK or RCE24VPRO.

 

 

24V lithium battery trolling motor wiring, single case 24V lithium connection; Dakota Lithium 24V wiring; 24V lithium charger connection

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.