Double Time connects two matching 24V batteries in parallel — positive to positive, negative to negative — to one 24V trolling motor. You keep 24 volts and double the amp-hours, so long tournament days and windy spot-locking sessions don't end early. Charge both batteries with one 24V charger.
Connect-Ease's patented, self-cleaning, positive-lock connectors replace wing nuts and stacked ring terminals at the battery. Install once and every connection after that is plug-and-play — the system wires your batteries correctly every time, and integrated charging leads keep your on-board charger connected while you fish, trailer or store the boat.
Compatible trolling motors and vehicles: Minn Kota Ultrex, Ulterra, Terrova and Riptide (24V / 70–80 lb); Garmin Force (24V); Lowrance Ghost (24V); MotorGuide Tour, X5 and Xi5 (24V); Rhodan 24V.
System voltage: 24V (two 24V batteries in parallel). Recommended batteries: Two matched 24V single-case lithium batteries (same brand, Ah and age) — Dakota Lithium, Amped and others. Amperage and protection: 24V motors (70–80 lb) draw up to ~56A at full throttle. Protect with a 60A resettable breaker. Parallel batteries share the load for longer runtime.
The Connect-Ease Double Time 24V parallel kit combines two 24V lithium batteries into a single system, dramatically extending trolling motor runtime without any loss of power. Used by Tournament anglers, guides, and serious fishermen who need all-day performance on a single charge.
• Parallel-connects two 24V batteries to one 24V motor
• Doubles amp-hours at the same voltage
• Integrated charging leads — charge both with one 24V charger
• Self-cleaning, positive-lock plug-and-play connectors
• Works alongside Ignite and Pro Series systems; lithium and AGM compatible
- Parallel-connects two 24V batteries to one 24V motor
• Doubles amp-hours at the same voltage
• Integrated charging leads — charge both with one 24V charger
• Self-cleaning, positive-lock plug-and-play connectors
• Works alongside Ignite and Pro Series systems; lithium and AGM compatible
-
Wire: Marine-grade wire with heat-shrink butt splices
-
Charging: Integrated on-board charging leads — compatible with Dakota Lithium, Amped, and other 24V charger connections
-
Connectors: Self-cleaning, positive-lock plug-and-play connections
-
Configuration: Parallel connection of two 24V batteries to one 24V trolling motor
-
Compatibility: AGM and lithium battery compatible
-
Installation: Splice, crimp and heat Shrink, no soldering required
Compatible Trolling Motors:
- Minn Kota Ultrex
- Ulterra
- Terrova
- Riptide (24V / 70–80 lb)
- Garmin Force (24V)
- Lowrance Ghost (24V)
- MotorGuide Tour, X5 and Xi5 (24V)
- Rhodan 24V
Recommended Voltage/ Amperage/ Fuse/ Breaker:
24V (two 24V batteries in parallel), 24V motors (70–80 lb) draw up to ~56A at full throttle. Protect with a 60A resettable breaker. Parallel batteries share the load for longer runtime
Battery Types:
Two matched 24V single-case lithium batteries (same brand, Ah and age) — Dakota Lithium, Amped and others
FAQ: How much more runtime will I get?
A: Two equal 24V batteries in parallel roughly double your amp-hours, so runtime nearly doubles at the same throttle.
FAQ: Do the batteries have to match?
A: Yes. Use the same brand, capacity and age for balanced charging and discharge.
24V parallel lithium battery kit, double trolling motor runtime; two 24V batteries parallel; tournament trolling motor power
