Connect-Ease RCE24VBK 24V series trolling motor battery connection kit
Connect-Ease RCE24VBK 24V series trolling motor battery connection kit
Connect-Ease RCE24VBK 24V series trolling motor battery connection kit
Connect-Ease RCE24VBK 24V series trolling motor battery connection kit

24V Series Battery Kit for Trolling Motors | Connect-Ease

RCE24VBK

Regular price$ 79.99
/

Running a 24V trolling motor and charging off the boat? The RCE24VBK series wires two 12V batteries with Connect-Ease plug-and-play connectors, eliminating the loose jumper and stacked ring terminals that cause voltage loss and corrosion. Unplug and pull both batteries in seconds.

Connect-Ease's patented, self-cleaning, positive-lock connectors replace wing nuts and stacked ring terminals at the battery. Install once and every connection after that is plug-and-play — no tools, no crossed wires, no corroded posts, and batteries come out in seconds for charging or winter storage.

Compatible trolling motors and vehicles: Minn Kota Ultrex, Ulterra, Terrova and Riptide (24V / 70–80 lb); Garmin Force (24V); Lowrance Ghost (24V); MotorGuide Tour, X5 and Xi5 (24V); Rhodan 24V.

System voltage: 24V (two 12V in series). Recommended batteries: Two 12V AGM/flooded/LiFePO4 batteries in series, or one 24V single-case lithium (60–120Ah). Amperage and protection: 24V motors (70–80 lb) draw up to ~56A at full throttle. Protect with a 60A resettable breaker.

Running a 24V trolling motor and charging off the boat? The RCE24VBK series wires two 12V batteries with Connect-Ease plug-and-play connectors, eliminating the loose jumper and stacked ring terminals that cause voltage loss and corrosion. Unplug and pull both batteries in seconds.

• Correct series connection of two 12V batteries every time
• No on-board charger leads — ideal for portable charging
• Self-cleaning, positive-lock connectors
• Marine-grade wire with heat-shrink terminations
• AGM, flooded and lithium compatible

  • Wire: 8-gauge UL1426 tinned marine-grade wire
  • Connectors: Self-cleaning, positive-lock plug-and-play connections — no tools required after installation
  • Includes: 1 × 24V trolling motor connection; 2 × 6 AWG 12V battery connectors with 24V bridge
  • Current Rating: 100 amp rated
  • Compatibility: All 24V trolling motor brands and models; AGM and lithium battery compatible
  • Rating: Saltwater approved; 1-year warranty; UL1426 tinned marine-grade wire
  • Patent No.: 9,559,473 / 9,866,047

Compatible Trolling Motors:

  • Minn Kota Ultrex
  • Ulterra
  • Terrova
  • Riptide (24V / 70–80 lb)
  • Garmin Force (24V)
  • Lowrance Ghost (24V)
  • MotorGuide Tour, X5 and Xi5 (24V)
  • Rhodan 24V

Recommended Voltage/ Amperage/ Fuse/ Breaker:

24V (two 12V in series), 24V motors (70–80 lb) draw up to ~56A at full throttle. Protect with a 60A resettable breaker

Battery Types:

Two 12V AGM/flooded/LiFePO4 batteries in series, or one 24V single-case lithium (60–120Ah)

FAQ: When should I choose this over RCE24VBCHK?

A: Choose RCE24VBK if you charge batteries off the boat. Choose RCE24VBCHK if you have an on-board charger.

FAQ: Do I need a breaker?

A: Yes, install a 60A resettable breaker on the positive motor lead.

Power: Two 12V AGM, flooded or LiFePO4 in series 

 

 

24V series battery connection, 24 volt trolling motor kit; two 12V batteries series; 24V battery jumper

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like