"Stop fighting wing nuts at the battery. The RCE12VBCHK connects your 12V trolling motor and on-board charger to the battery through one plug-and-play connector, so you can pull the battery for winter storage or charging in seconds — no tools, no loose terminals. Built with 8-gauge marine-grade wire and Connect-Ease's patented, UL1977-rated connector rated to 120 amps. Connect-Ease's patented, self-cleaning, positive-lock connectors replace wing nuts and stacked ring terminals at the battery. Install once and every connection after that is plug-and-play — the system wires your batteries correctly every time, and integrated charging leads keep your on-board charger connected while you fish, trailer or store the boat. Compatible trolling motors and vehicles: Minn Kota Endura, Traxxis, PowerDrive, Terrova and Riptide (12V models); Motor Guide X3, R3 and Xi3 (12V); Newport Vessels and Water Snake 12V motors. System voltage: 12V. Recommended batteries: 12V deep-cycle AGM, flooded lead-acid or 12.8V LiFePO4 lithium (Group 24/27/31, 50–120Ah). Amperage and protection: Plan for up to 110A continuous draw on 12V motors (30–55 lb thrust). Protect with a 50A breaker per motor maker." Key Features: • 8-gauge marine-grade wire with heat-shrink butt splices • Integrated charging lead — motor and on-board charger stay connected at the same time • Self-cleaning, positive-lock connector rated 120A (UL1977) • No cutting, splicing or soldering after initial install • Also powers ATVs, shallow-water anchors and solar charging setups • Patent No. 9,559,473 — AGM and lithium compatible Recommended Voltage: 12V, 16V Amperage/Fuse /breaker: Plan for up to 120A continuous draw on 12V motors (30–55 lb thrust). Protect with a 50A breaker per motor maker Battery Types: 12V deep-cycle AGM, flooded lead-acid or 12.8V LiFePO4 lithium (Group 24/27/31, 50–120Ah) FAQ: Will this work with my Minn Kota or MotorGuide 12V motor? Yes. It works with any 12V trolling motor, including Minn Kota Endura, Traxxis, PowerDrive and Terrova and MotorGuide X3/R3, because it connects at the battery, to the motor. FAQ: Can I keep my on-board charger connected? Yes. The integrated charging lead lets your charger and motor share the same connection, so you charge without unplugging anything.
• 8-gauge marine-grade wire with heat-shrink butt splices
• Integrated charging lead — motor and on-board charger stay connected at the same time
• Self-cleaning, positive-lock connector rated 120A (UL1977)
• No cutting, splicing or soldering after initial install
• Also powers ATVs, shallow-water anchors and solar charging setups
• Patent No. 9,559,473 — AGM and lithium compatible
Compatible Trolling Motors:
- Minn Kota Endura
- Traxxis
- PowerDrive
- Terrova
- Riptide (12V models)
- MotorGuide X3, R3 and Xi3 (12V)
-
Newport Vessels and Watersnake 12V motors
Recommended Voltage/ Amperage/ Fuse/ Breaker:
12V Plan for up to 120A continuous draw on 12V motors (30–55 lb thrust). Protect with a 50A breaker per motor maker
Battery Types:
12V deep-cycle AGM, flooded lead-acid or 12.8V LiFePO4 lithium (Group 24/27/31, 50–120Ah)
FAQ: Will this work with my Minn Kota or MotorGuide 12V motor?
A: Yes. It works with any 12V trolling motor, including Minn Kota Endura, Traxxis, PowerDrive, Terrova and MotorGuide X3/R3, because it connects at the battery, not the motor.
FAQ: Can I keep my on-board charger connected?
A: Yes. The integrated charging lead lets your charger and motor share the same connection, so you charge without unplugging anything.
12V trolling motor wiring kit, trolling motor quick connect, on-board charger connection, 12V trolling motor plug, Minn Kota 12V wiring
